News Releases
Investors



Show printable version of 'Amber Zone Update' in a New Window
 June 06, 2012
Amber Zone Update

 Vancouver, BC -- North American Tungsten Corporation Ltd. (TSX.V: NTC) ("NTC" or "the Company") is pleased to provide an update on its continuing underground diamond drill exploration program in the Amber Zone on its 100% owned Cantung tungsten mine in the Northwest Territories.

Seven holes were fan drilled from the same setup on 3680 level, as follow-up on holes: U1943, U1936, and U1937, discussed in the NTC February 6th, 2012 news release and identified as the Amber Zone. These seven new holes were drilled approximately 450ft east and 200ft up dip elevation from the three drill holes. The Amber Zone was discovered early in 2012 by follow-up drilling of the historic drill hole, U719, which had intercepted 36ft averaging 1.36% WO3.

Significant results, from the seven holes, include 26.4ft averaging 3.02 % WO3 (hole U1983) and 34.0ft averaging 1.29 % WO3 (U1981). Higher grade intercepts included 18.4ft averaging 4.09 %WO3 (hole U1981), 13.0ft averaging 2.60 % WO3 (hole U1983), and 9.9ft averaging 2.50% (hole U1984). Results from the seven holes are summarized in the table below:

Drill hole
From
To
Interval (ft)
Estimated True Thickness (ft)
WO3%
U1978
47.0
56.6
9.6
7.6
1.00
 
65.0
75.5
10.5
8.5
0.62
 
81.3
93.1
11.8
9.6
0.31
 
169.4
193.1
23.7
11.8
0.70
U1979
43.0
49.0
6.0
4.2
0.27
 
57.1
70.0
12.9
10.0
0.41
 
103.0
125.0
22.0
17.0
0.42
U1980
19.1
23.0
3.9
3.8
1.09
 
41.0
53.9
12.9
12.3
1.15
 
81.0
97.5
16.5
15.8
1.04
U1981
17.8
51.8
34.8
32.2
1.29
 
81.1 
96 
14.9
14.0
0.86 
Including
23.2
36.2
13.0
12.1
2.60
U1983
30.1
56.5
26.4
25.1
3.02
 
80.0
100.0
20.0
19.0
0.53
Including
33.6
52.0
18.4
17.5
4.09
U1984
41.3
51.1
9.8
7.9
0.39
 
55
78.9
23.9
20.4
1.32
 
110.0 
140.0
30.0
26.0
0.31 
Including
69
78.9
9.9
8.4
2.50
U1985
40
50
10
7.1
0.65
 
70
75
5.0
3.5
0.36
 
84.0
86.5
2.5
1.9
0.66
 
165.0
185
20
14.2
0.74


The new area termed the "Amber Zone" is located near the "below 3700 level" of the West Extension and the Central Flats areas and is outside the currently defined resource. Additional drill sections are currently being tested from 3680 Level.
The discovery of the Amber Zone is a result of an ongoing program of computerized modeling and review of over 50 years of accumulated data for the Cantung mine

Figure 1. Plan view showing the location of reported diamond drillholes relative to 3D model of existing workings and known orebodies (in red).

Figure 1. Plan view showing the location of reported diamond drillholes relative to 3D model of existing workings and known orebodies (in red).

Figure 2. Cross-section, looking approximately to the West, of new diamond drill holes.

Figure 2. Cross-section, looking approximately to the West, of new diamond drill holes.

Figure 3. Cross-section, looking approximately to the South West, of new diamond drill holes.

Figure 3. Cross-section, looking approximately to the South West, of new diamond drill holes.

Mr. Stephen Leahy, Chairman of North American Tungsten stated "We are very pleased with the continuing success of our underground drilling program in and around the Amber Zone. The use of computer modeling of historical drill hole data has been an excellent tool for our geologists to identify new underground exploration targets."

Quality Assurance Sample analysis were completed at the laboratory located at the Cantung Mine site utilizing both XRF and colorimetric methods. Results for both methods were comparable. Check assays will be done by ALS Chemex Labs in Vancouver. Previous comparisons have been acceptable and reliable.

Qualified Person The technical information contained in this release has been prepared under the supervision of Finlay Bakker, P. Geo, Chief Geologist for the Cantung Mine for the Company. Mr. Bakker is a qualified person under the terms of National Instrument 43-101 of the Canadian Securities Administrators.

ABOUT NORTH AMERICAN TUNGSTEN CORPORATION LTD
The Company is a publicly listed Tier 1 Junior Resource Company engaged primarily in the operation, development, and acquisition of tungsten and other related mineral properties in Canada. The Company's 100% owned Cantung mine and Mactung development project make it one of the few tungsten producers with a strategic asset in the western world. Mactung is one of the world's largest known undeveloped high grade tungsten-skarn deposits.

ON BEHALF OF THE BOARD OF DIRECTORS

"Stephen M. Leahy"

Stephen M. Leahy,
Chairman & CEO

Neither TSX Venture Exchange nor its Regulation Services Provider (as that term as defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release." Cautionary Note: The Company relies upon litigation protection for "forward-looking" statements.

Cautionary Note: The Company relies upon litigation protection for "forward-looking" statements.

Cautionary Note

Safe Harbour Statement under the United States Private Securities Litigation Reform Act of 1995 and similar Canadian legislation: Except for the statements of historical fact contained herein, the information presented contains "Forward-looking statements" within the meaning of the Private Securities Litigation Reform Act of 1995 and similar Canadian legislation. Often, but not always, forward-looking statements can be identified by the use of words such as "plans", "expects," "budget," "scheduled," "estimates," "forecasts," "intends," "anticipates," "believes," or variation of such words and phrases that refer to certain actions, events or results to be taken, and other factors which may cause the actual results, performance or achievements of North American Tungsten Corporation Ltd. To be materially different from any future results, performance or achievements expressed or implied by such forward-looking statements. Such factors include, among others, the actual results of reclamation activities, the estimation or realization of mineral reserves and resources, the timing and amount of estimated future production, costs of production, capital expenditures, future prices of commodities, possible variations in ore grade or recovery rates, efficacy and efficiency of milling process, failure of plant, equipment or processes to operate as anticipated, accidents, labour disputes and other risks in the mining industry. Although North American Tungsten Corporation Ltd. has attempted to identify important factors that could cause actions, events or results to differ materially from those described in forward-looking statements, there may be other factors that cause actions, events or results not to be as anticipated, estimated or intended. There can be no assurance that such statements will prove to be accurate as actual results and future events could differ materially from those anticipated in such statements. Accordingly, readers should not place undue reliance on forward-looking statements contained herein and in North American Tungsten Corporation Ltd.'s other filing incorporated by reference.

Cautionary Note to United States Investors Concerning Estimates of Measured, Indicated and Inferred Resources: This press release may use the terms "Measured," "indicated" and "inferred" Resources. United States investors are advised that while such terms are recognized and required by Canadian regulators, the United States Securities and Exchange Commission does not recognize them. "Inferred Mineral Resources" have a great amount of uncertainty as to their existence and as to their economic and legal feasibility. It cannot be assumed that all or any part of an Inferred Mineral Resource will ever be upgraded to a higher category. Under Canadian rules, estimates of Inferred Mineral Resources may not form the basis of feasibility or other economic studies. United States investors are cautioned not to assume that all or any part of Measured or Indicated Mineral Resources will ever be converted into Mineral Reserves. United States investors are also cautioned not to assume that all or any part of an Inferred Mineral Resource exists, or is economically or legally mineable.


INVESTOR CONTACT:
info@natungsten.com, Phone: +1.604.684.5300 Fax: +1.604.684.2992
 
 

You can view the Next News Releases item: Tue Jun 12, 2012, Road Conditions Affect Cantung Mine

You can view the Previous News Releases item: Wed May 23, 2012, North American Tungsten Q2: Revenue of $33.4 million; EBITDA<html><sup>1</sup></html> of $8.8 million and Net Income of $2.5 million

You can return to the main News Releases page, or press the Back button on your browser.

Adnet Communications Inc.